V.G. Marketing is a storage Solution Provider was started in the year of 2007. It is one the leading company specialized in designing, manufacturing, installing and servicing in racking system. In 2001 to 2007 we worked for a company which is similar to the same subject and learnt, so we had good experience in need of this subject. Hence we made a significant step by setting of our team and factory in Chennai.
Rolling is the best known way to bend metal, perhaps because it is the least costly. Rolling uses an appropriate size die that adjusts to the steel tube, angle, pipe, channel, bar or steel beam and revolves at the same peripheral speed, turning in opposite directions. As the metal passes through the roll, the machine applies pressure to bend the tubing or the beam to the desired radius.
Automatic CNC pipe benders can bends complicated tubes or pipes which are not properly bends by conventional CNC pipe benders. In this Manipulation Services Machine, pipe set with the help of the software, so it can be used to extend multiple pipes with tubes and other components that need clockwise and counterclockwise shifts. These kinds of machines allows user to work freely with safety and also monitoring work with a computer. By using these bending machines we able to work with perfection or in a less time than human benders. It is really a great innovation in the field of construction.
So what Pipe Bending are those stunted metal tube donuts called ball bearings for anyway? Are they used as a spare wheel? Do they hold in evil shop-floor spirits? No, they help things move more efficiently. In an early demonstration of bearing usage, three ladies pulled a locomotive (It was just a demonstration, not a career development).
Position the pipe into the machine. The pipes are fastened by points on the handles and are placed in front of the bending arch. On one of the handles is a flat side that runs flush with the edges. Pull the upper handle onto the bench. These must be squeezed together to pull the pipe tight from the arch to bend the pipe.
0.1KW ~ 7.5KW AC servo motor – This is also one of the high resolution feedback system. This can be availed at low cost and has high speed and accuracy control. This is used for socks knitting M/C, Embroidery M/C, and Quilting M/C and as TFO Winder.
When that’s done cut out a distance of pipe that will reach the primary pipeline and run back down the combi boiler as well as the returner. Use a blowtorch and pipe bending spring to make any corner pipes as looked-for.